DP 10 K High Performance Steel Wire Rope
Main Properties
- 10 outer strands closed in a parallel lay together with the inner core strands
- Regular lay
- Galvanized wires
- All compacted strands
- Extremely high breaking load
- Fitted for multilayer spooling and multipart reeving thanks
to its very high grade of flexibility
- Cannot be used when a fleet angle is >1°30
- High modulus of elasticity, low stretch
Applications:
When an extremely high MBL is required for a multipart reeving hoist system: electric hoists, twin hoist systems (right and left ropes), boom hoist and pendant rope for mobile cranes, tower cranes and all marine equipment.
| Diameter | Cross Section | Weight | MBL kN | ||
| mm | inch | mm2 | kg/m | 2160 N/mm2 | |
 |
14 | 9/16 | 116 | 0.98 | 214.5 |
| 16 | 5/8 | 151 | 1.29 | 279.9 | |
- Tolerance on Diameter: EN: (0; +5%); Design Oliveira: (+1%;
+4%)
- Filling factor f = 0.751
- Spinning Factor (k): k = 0.840
- Modulus of elasticity: E = 125000 N/mm2 (±5000 N/mm2)
ATTENTION:
Due to its particular full unilay parallel closing (outer/inner strands), this rope is very sensible to the rotation and fleet angle.
Cannot be used for big lifting heights, unguided loads, short number of falls, etc.
DP 10 K must never be used with a swivel.
ATTENTION:
Imperial diameters are shown for reference only. For assistance on metric-to-imperial or imperial-to-metric diameter substitutions, please contact us for technical assistance.
